Warburton 9* cornet backbore

Description

Warburton 9* cornet backbore

Warburton 9* cornet backbore. For use with Warburton tops, the 9* is quite free blowing and well suited to orchestral cornet playing.

Warburton cornet backbores:

1, 2, 3 – Warburton’s tightest and most commercial sounding backbores. These models have a concentrated and intense sound.

4, 5, 6 – Tight to medium. With progressively less resistance, these models produce a bright and very projecting tone.

KT Backbore – This backbore falls between the 5 and 6 in resistance and produces a compact sound appropriate for outdoor and Dixieland playing.

7, 8, 9 – Medium large sizes. The #7 has been our best selling model for the past nine years. This series produces a quality of sound acceptable in the orchestra as well as the concert band. Models #8 and #9 are very well received by the brass band player who appreciates the increased volume of sound with less resistance.

10, 11, 12 – Very large “Symphonic” sizes. These models have very little resistance and offer the strong player the potential for the ultimate in full, rich sound.

There are three styles of cornet backbores:

The STANDARD Series – Our standard series models have long established themselves as the most popular choice for nearly any playing situation.

The STAR (*) Series – These were designed to allow each of the STANDARD models to be more free-blowing without the necessity of reaming to a larger bore size. This may help to avoid losing focus sometimes caused by playing too large of a backbore. Since these models were made available, the medium large sizes (7* to 10*) have been very well received by orchestral cornet players.

The BC Series – These British cornet backbores are shorter than the standard cornet backbores. They were specifically designed for use with the BC tops, resulting in an overall length of 2.25″. These are very popular with brass band enthusiasts.

Warburton:

The Warburton system lets you choose a combination of rim diameter, cup style and depth, with a backbore to best balance your sound and resistance. This flexibility means you can have the most efficient mouthpiece with which to perform in any given playing situation.

Our two-piece system consists of fully interchangeable “TOP” sections and “BACKBORE” sections. Due to the many demands placed upon the modern brass player, the variety of Warburton cup designs are able to produce the most desired sound in any playing idiom.

The backbore sizes compliment the cup designs and further assist in the refinement and “fine-tuning” of the sound. Consideration has been given even to the placement of the backbore into the receiver (amount of gap).

The Warburton system allows the player the opportunity to personally “balance” their equipment. This can now be accomplished without the necessity of traveling to a mouthpiece maker or waiting for a mail-order custom made piece that often does not work and cannot be exchanged.